How Suppliers Get Specified by Architects and Designers

Most marketing advice assumes you are selling to the person who pays. In the building products trade you usually are not. The decision that matters is made months earlier, by an architect or interior designer writing a specification, and often without anyone from your company in the room.

That is a different job to selling. It is the job of being the product that is already written down when the builder goes to price the project.

Here is how I would rank the channels for an Australian supplier trying to reach specifiers, and why the one most brands spend the least on is the one that matters most.

If you are an architect rather than a supplier, the post you want is marketing for architects, which is about winning projects rather than winning specifications.

First, understand what you are actually trying to win

An architect specifies a product in one of two ways.

Generic or performance specification. The document describes what the product has to do and which standards it has to meet, without naming a brand. The builder then sources whatever satisfies it. If this is how your category gets written, your competition is every compliant product on the market, and price usually decides.

Proprietary specification. The document names your product. This is the one worth chasing. It does not guarantee the sale, because substitution requests happen, but it means every other supplier is now arguing to replace you rather than you arguing to get in.

Everything below is about moving your product from the first column to the second.

The system most suppliers have never looked at

NATSPEC is Australia’s national master specification. It has been running since 1975 and is a not-for-profit owned by industry, through the professional associations and government property groups. Architects and builders subscribe to packages, pick the worksections relevant to a project, and build their specification from them.

The part suppliers miss: NATSPEC runs a Product Partner arrangement where a manufacturer gets a branded worksection, built on the equivalent generic worksection and sharing its classification number. Rondo has them for partitions, suspended ceilings and access panels. Interpon joined for architectural powder coatings, so specifiers can select those coatings inside the worksection itself.

Think about what that does. Instead of hoping an architect remembers you, your product sits inside the document they are already building the specification from.

I have not been able to find published partner costs or criteria, so treat it as something to enquire about rather than a line item you can budget today.

The five channels, ranked

1. Getting into the specification system

First and it is not close. Everything else on this list is an attempt to influence a document. This is being in it.

That means the NATSPEC route where your category fits, and it means having specification-ready material of your own: a worksection or spec clause an architect can paste in, the standards your product is tested to, and the compliance evidence that answers the question before it gets asked.

Suppliers routinely publish a brochure and call it technical content. An architect cannot specify from a brochure.

2. The relationship with the practice

Second, and the one with the longest tail. CPD sessions and lunch presentations are the standard route, and they work because they put you in front of the people who write the documents, in the place where the writing happens.

The trap is treating it as a pitch. A session that teaches a detailing problem, a compliance change or a failure mode gets you invited back. A session that is forty minutes about your range does not.

Worth knowing: the people doing the specifying are not always the directors. In larger practices it is frequently a graduate or a technical documenter. Those are the relationships that compound over a decade.

3. The specifier directories

Third. Selector, run by Architecture Media, is where a lot of Australian specifiers look for products, and its advertising carries endorsement from the Australian Institute of Architects and the Design Institute of Australia. Archify, from BCI Central, runs a similar model with profiles and specification tracking.

These are paid placements and the operators publish their own numbers, so go in asking for evidence rather than taking the deck at face value. Ask what a lead actually looks like and who you would be talking to.

4. Your own technical library

Fourth, and the cheapest thing on this list to fix.

Whatever an architect needs to draw and document your product should be on your website, findable, current, and free of a form. BIM and Revit files, CAD details, data sheets, warranty terms, installation guides, finishes and sizes.

Putting your CAD files behind a lead capture form feels like marketing. What it mostly does is send the architect to a competitor who did not make them fill in anything. You have traded a specification for an email address.

5. Advertising and trade media

Last, and I say that as someone whose agency runs paid media.

Advertising to specifiers has a job, and the job is recognition. It makes the CPD invitation get accepted and the directory listing get clicked. On its own, almost nobody reads an ad and writes a product into a specification.

Treat it as support for the four above. A supplier spending heavily on trade advertising while their CAD files sit behind a form has the order upside down.

The 12 month plan

If I were starting from scratch with a building products brand, this would be the order.

Months one to three. Audit what a specifier can actually get from you today. Try to document your own product using only what is on your website. Fix the gaps before anything else.

Months three to six. Build the specification material properly, and find out what the NATSPEC route looks like for your category.

Months six to nine. Start the CPD and practice relationships. Build the session around a problem, not a product.

Months nine to twelve. Add directory presence and advertising once there is something worth sending people to.

The three mistakes I see most

Marketing to the builder and calling it specification. The builder prices what is written. By then the decision is made.

Gating the technical files. Covered above, and it is the most common own goal in the category.

Measuring the wrong thing. Leads and downloads are easy to count. Specifications are the thing that pays. Ask your sales team how often they hear a project was already written your way, and start tracking it.

Where Phoenix Marketing fits

We work with suppliers in that order: technical library first, then the specification material, then the relationships and the paid channels once there is something behind them. If you want a look at what a specifier can currently find about your product, get in touch and we will go through it with you.

Either way, start with your own website. It is the cheapest fix available and almost nobody does it properly.

Frequently asked questions

How long does it take to see results from marketing to architects and designers?

Longer than most channels. A specification written this year may not become a purchase order for eighteen months or more, depending on the project. That lag is the single biggest reason suppliers give up on it too early.

Is it worth paying for a specifier directory listing?

It can be, once your technical material is in order. Paying to send architects to a website they cannot document from is money spent to prove you are not ready.

What is the difference between marketing to architects and marketing to builders?

Architects decide what gets written. Builders price and source what has already been written, and sometimes propose substitutions. Both matter, in that order.

Do we need BIM files?

If your product gets drawn into a model, yes. If an architect cannot place it, they will place something else.

Sources

  • NATSPEC, on the national master specification system, its ownership structure and the Product Partner branded worksection arrangement
  • Rondo and Interpon, as published examples of NATSPEC branded worksections
  • Selector, Architecture Media, on specifier audience and association endorsement
  • Archify, BCI Central, on profiles and specification tracking

Ready to Grow Your Business?

Let’s build a marketing strategy that gets results. Talk to the Phoenix team today.